Correction & update scripts

default_configuration/dovecot/dovecot.conf.example

@@ -0,0 +1,101 @@
+## Dovecot configuration file
+
+# If you're in a hurry, see http://wiki2.dovecot.org/QuickConfiguration
+
+# "doveconf -n" command gives a clean output of the changed settings. Use it
+# instead of copy&pasting files when posting to the Dovecot mailing list.
+
+# '#' character and everything after it is treated as comments. Extra spaces
+# and tabs are ignored. If you want to use either of these explicitly, put the
+# value inside quotes, eg.: key = "# char and trailing whitespace  "
+
+# Most (but not all) settings can be overridden by different protocols and/or
+# source/destination IPs by placing the settings inside sections, for example:
+# protocol imap { }, local 127.0.0.1 { }, remote 10.0.0.0/8 { }
+
+# Default values are shown for each setting, it's not required to uncomment
+# those. These are exceptions to this though: No sections (e.g. namespace {})
+# or plugin settings are added by default, they're listed only as examples.
+# Paths are also just examples with the real defaults being based on configure
+# options. The paths listed here are for configure --prefix=/usr
+# --sysconfdir=/etc --localstatedir=/var
+
+# Protocols we want to be serving.
+protocols = imap 
+
+# A comma separated list of IPs or hosts where to listen in for connections. 
+# "*" listens in all IPv4 interfaces, "::" listens in all IPv6 interfaces.
+# If you want to specify non-default ports or anything more complex,
+# edit conf.d/master.conf.
+listen = *, ::
+
+# Base directory where to store runtime data.
+#base_dir = /var/dovecot/
+
+# Name of this instance. In multi-instance setup doveadm and other commands
+# can use -i <instance_name> to select which instance is used (an alternative
+# to -c <config_path>). The instance name is also added to Dovecot processes
+# in ps output.
+#instance_name = dovecot
+
+# Greeting message for clients.
+#login_greeting = Dovecot ready.
+
+# Space separated list of trusted network ranges. Connections from these
+# IPs are allowed to override their IP addresses and ports (for logging and
+# for authentication checks). disable_plaintext_auth is also ignored for
+# these networks. Typically you'd specify your IMAP proxy servers here.
+#login_trusted_networks =
+
+# Space separated list of login access check sockets (e.g. tcpwrap)
+#login_access_sockets = 
+
+# With proxy_maybe=yes if proxy destination matches any of these IPs, don't do
+# proxying. This isn't necessary normally, but may be useful if the destination
+# IP is e.g. a load balancer's IP.
+#auth_proxy_self =
+
+# Show more verbose process titles (in ps). Currently shows user name and
+# IP address. Useful for seeing who are actually using the IMAP processes
+# (eg. shared mailboxes or if same uid is used for multiple accounts).
+#verbose_proctitle = no
+
+# Should all processes be killed when Dovecot master process shuts down.
+# Setting this to "no" means that Dovecot can be upgraded without
+# forcing existing client connections to close (although that could also be
+# a problem if the upgrade is e.g. because of a security fix).
+#shutdown_clients = yes
+
+# If non-zero, run mail commands via this many connections to doveadm server,
+# instead of running them directly in the same process.
+#doveadm_worker_count = 0
+# UNIX socket or host:port used for connecting to doveadm server
+#doveadm_socket_path = doveadm-server
+
+# Space separated list of environment variables that are preserved on Dovecot
+# startup and passed down to all of its child processes. You can also give
+# key=value pairs to always set specific settings.
+#import_environment = TZ
+
+##
+## Dictionary server settings
+##
+
+# Dictionary can be used to store key=value lists. This is used by several
+# plugins. The dictionary can be accessed either directly or though a
+# dictionary server. The following dict block maps dictionary names to URIs
+# when the server is used. These can then be referenced using URIs in format
+# "proxy::<name>".
+
+dict {
+  #quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext
+}
+
+# Most of the actual configuration gets included below. The filenames are
+# first sorted by their ASCII value and parsed in that order. The 00-prefixes
+# in filenames are intended to make it easier to understand the ordering.
+#!include conf.d/*.conf
+
+# A config file can also tried to be included without giving an error if
+# it's not found:
+!include_try local.conf

default_configuration/dovecot/local.conf.example

@@ -0,0 +1,89 @@
+listen = *
+protocols = imap
+first_valid_uid = 1000
+first_valid_gid = 1000
+mail_location = maildir:/var/vmail/%d/%n
+mail_plugin_dir = /usr/local/lib/dovecot
+disable_plaintext_auth = yes
+
+managesieve_notify_capability = mailto
+managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex  imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext imapsieve vnd.dovecot.imapsieve
+
+mbox_write_locks = fcntl
+mmap_disable = yes
+namespace inbox {
+  inbox = yes
+  location =
+  mailbox Archive {
+  auto = subscribe
+  special_use = \Archive
+  }
+  mailbox Drafts {
+  auto = subscribe
+  special_use = \Drafts
+  }
+  mailbox Junk {
+  auto = subscribe
+  special_use = \Junk
+  }
+  mailbox Sent {
+  auto = subscribe
+  special_use = \Sent
+  }
+  mailbox Trash {
+  auto = subscribe
+  special_use = \Trash
+  }
+  prefix =
+}
+
+service auth {
+    user = $default_internal_user
+    group = _maildaemons
+}
+
+passdb {
+  args = scheme=blf-crypt /etc/mail/passwd
+  driver = passwd-file
+}
+
+plugin {
+  imapsieve_mailbox1_before = file:/usr/local/lib/dovecot/sieve/report-spam.sieve
+  imapsieve_mailbox1_causes = COPY
+  imapsieve_mailbox1_name = Junk
+  imapsieve_mailbox2_before = file:/usr/local/lib/dovecot/sieve/report-ham.sieve
+  imapsieve_mailbox2_causes = COPY
+  imapsieve_mailbox2_from = Junk
+  imapsieve_mailbox2_name = *
+  sieve = file:~/sieve;active=~/.dovecot.sieve
+  sieve_global_extensions = +vnd.dovecot.pipe +vnd.dovecot.environment
+  sieve_pipe_bin_dir = /usr/local/lib/dovecot/sieve
+  sieve_plugins = sieve_imapsieve sieve_extprograms
+}
+
+
+protocols = imap sieve
+service imap-login {
+  inet_listener imap {
+  port = 143
+  }
+}
+
+ssl = required
+
+ssl_min_protocol = TLSv1.2
+ssl_cipher_list = EECDH+AESGCM
+ssl_prefer_server_ciphers = yes
+#ssl_cipher_list = ALL:!DH:!kRSA:!SRP:!kDHd:!DSS:!aNULL:!eNULL:!EXPORT:!DES:!3DES:!MD5:!PSK:!RC4:!ADH:!LOW@STRENGTH
+
+ssl_cert = </etc/ssl/kitoy.me.crt
+ssl_key = </etc/ssl/private/kitoy.me.key
+
+userdb {
+    driver = static
+    args = uid=vmail gid=vmail home=/var/vmail/%d/%n/ 
+}
+
+protocol imap {
+  mail_plugins = " imap_sieve"
+}